JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

KEE Automotive are pleased to announce that we have been appointed the
Authorised Distributor for the Vgate range of products.


Product Description


Vgate VC310 CodeReader
The Vgate Scan VC310 is a new code reader and supports all OBD2 protocols, including the newly released
Controller Area Network(CAN) protocol. Though it is small, it is able to retrieve
same information as large expensive scanners!

Features & Benefits
Works with all 1996 and newer vehicles that are OBD2 compliant(including 11bit CAN and 29bit CAN)

Reads and Clears generic and manufacturer specific Diagnostic Trouble Codes(DTCs) and turns off check engine light

Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes

Reviews the emission readiness status of OBD monitors

Determines the malfunction indicator lamp(MIL) status

Retrieves VIN(Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9

Easy-to-read backlit 2-line LCD display

Easy to use with one plug-in

Stand-alone unit with no need for an additional laptop computer to operate

Small in size and conveniently fits in your palm

Safely communicates with the on-board computer

Free CD software with over 7000 DTC definitions

No batteries needed-powered via detachable OBD2 cable

Specifications
Display: Backlit LCD, 2-line, 8 characters
Operating Temperature: 0 to 50
Storage Temperature: -20 to 70
Power: 10.0 to 15.5 Volts provided via vehicle battery

Dimensions:

Length / Width / Height
113 mm / 74 mm / 21mm

0.25 Kg



Will it work on my Car ?

In 1996 in the United States, a Federal Law came into force requiring all US-sold cars to be OBD2 compliant. Most OBD2 tools are therefore advertised as working with all cars from 1996.

 The OBD2 Federal Law applied only to cars sold in the US.

 In the UK and the rest of Europe, our equivalent law (European On-Board Diagnostics, or EOBD) did not come into force, and more importantly, was not fully implemented by our car manufacturers, until 2001 for petrol cars (2003/4 for diesels).

 Due to this it is difficult to know exactly what European vehicles are OBD2 compliant before the above dates and we recommend checking with your dealer before purchasing equipment for cars manufactured before 2001 Petrol and 2004 Diesel.

 All Cars sold from 2008 use the CAN-Bus protocol.

What good does it do to measure OBD-II output?

OBD-II signals are most often sought in response to a "Check Engine Light" appearing on the dashboard or driveability problems experienced with the vehicle. The data provided by OBD-II can often pinpoint the specific component that has malfunctioned, saving substantial time and cost compared to guess-and-replace repairs. Scanning OBD-II signals can also provide valuable information on the condition of a used car purchase.


Tell me about that "Check Engine Light".

The service industry calls the Check Engine light on your dash an "MIL" or Malfunction Indicator Light. It shows three different types of signals. Occasional flashes show momentary malfunctions. It stays on if the problem is of a more serious nature, affecting the emissions output or safety of the vehicle. A constantly flashing MIL is a sign of a major problem which can cause serious damage if the engine is not stopped immediately. In all cases a "freeze frame" of all sensor readings at the time is recorded in the central computer of the vehicle.

Hard failure signals caused by serious problems will cause the MIL to stay on any time the car is running until the problem is repaired and the MIL reset. Intermittent failures cause the MIL to light momentarily and they often go out before the problem is located. The freeze frame of the car's condition captured in the computer at the time of the malfunction can be very valuable in diagnosing these intermittent problems. However, in some cases if the car completes three driving cycles without a re-occurrence of the problem, the freeze frame will be erased.


OBD-II and your car's health

Because of their investment in the equipment required, most repair shops charge a fee, some-times substantial, to attach the scanning equipment and diagnose problems using the OBD-II system signals. Home mechanics and small shop technicians have been restricted from working with these signals by the cost and technical complexity of the equipment. With the introduction of more economical and user friendly scanning devices, it is now practical for almost anyone to access OBD-II signals and use them for their own testing and repairs.

Scanners vary greatly in their complexity. The best connect easily and use software to quickly and automatically call up the OBD-II information. They should have recording ability so that data can be collected during a test drive without distracting the technician driving the car. A system connecting to a laptop or desk top computer provides expanded memory for data and the ability to export data to a spreadsheet or graphing utility.


Customers who bought this product also purchased