Classic Car Fuel Injection Conversion
Universal Vehicle Kit for 4 injector vehicle upto 136 BHP
This kit contains all the parts needed for our Classic Fuel Injection system
(you do not need to order anything else from our range )
This universal kit will suit a vehicle with 4 injector and includes full idle speed control capability
We have several customers who have replaced their Bosch or Lucas mechanical systems with our electronic system on various cars with good success.
You may have to carry out some minor machining to hold the injectors in place but I would expect this to be fairly minimal and easy to do ( electronic injector needs 14mm hole )
This kit includes 4 electronic injectors that you fit in the same location as the old mechanical versions.
It can also be used to upgrade an early mechanical injection system.
This kit can be used on virtually any car where you modify your inlet manifold to hold the 4 injectors, in a similar manner to a modern fuel injection car.
We have assembled this kit for easy ordering but if you prefer you can still order some or all of the parts using our individual listings
This kit contains
Engine ECU
ECU software
ECU to Laptop communication lead
Engine Sensor Kit Comprising -
Throttle Position Sensor
Coolant Temperature Sensor
Manifold Absolute Pressure Sensor
Distributor Sensor
Distributor Pickup
Ignition Amplifier
Idle Control Valve and housing
Wide Band Oxygen Sensor Amplifier
Wide Band Bosch Oxygen Sensor
Weld On Oxygen Sensor Boss
Fuel System Kit Comprising -
High Pressure Fuel Pump
Fuel Pump Brackets
Inline Fuel Filter
Fuel Filter Bracket
Fuel Pressure Regulator
10m of High Pressure Fuel Hose
Fuel Hose Clamps
Fuel Injector Kit Comprising - 4 x Bosch or Fuel Injectors for total engine power upto around 136 BHP
4 x Fuel Injector High Pressure Hose Fittings for Fuel Inlet
8 x Fuel Injector Mounting Plates
8 x M6 Mounting Plate Fixings
Electrical Wiring
Universal wiring loom ready to install
Please note this kit does not contain nuts, bolts and other fixings or adapters as they will be specific to your application but will easily be sourced from your normal suppliers or your existing workshop stock of parts.
Classic Fuel Injection - Universal Complete Kit with 4 Injectors - Upto 136 BHP
-
£1,550.00
- Ex Tax: £1,550.00
Tags:
Classic Fuel Injection - Universal Complete Kit with 4 Injectors - Upto 136 BHP
IMPORTANT INFORMATION RELATING TO THE RETURN OF COMPLETE FUEL INJECTION VEHICLE KITS
The vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.
This initial start file is simply provided as an aid for
engine starting, it should not be considered a suitable final
calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.
Our Classic Fuel Injection Kits are custom built to order and to the
customer general specification and as such are exempt from automatic
return rights under Consumer Contract regulations.
By ordering this
conversion kit you understand that further ECU calibration work will be
required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.