Siemens Deka Style Fuel Injector - Reference Part number 110324, 1400 cc/min 133LB
EV6 body style with EV1 Junior Timer connector.
These injectors are based on the 110324 but have been professionally modified by a Siemens injector expert to give the revised flow of 1400cc
When used with our systems these injections are good for around 250 BHP per injector
So this gives the following options
1 injector for engines upto around 250 BHP
2 injector for engines upto around 500 BHP
The price shown is per injector - adjust your basket quantities to suit your application
SPECIFICATION (Using N-Heptane)
- 1400 cc/min @ 3bar (43.5psi)
- 12 ohms resistance (HIGH impedance)
- EV6 Long body style
- Standard 2 pin Junior timer connector ( often called EV1 connector )
Siemens Deka Style Fuel Injector - Reference 110324 - 1400 cc/min
Tags:
Siemens Deka 110324 1400cc
IMPORTANT INFORMATION RELATING TO THE RETURN OF COMPLETE FUEL INJECTION VEHICLE KITS
The vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.
This initial start file is simply provided as an aid for
engine starting, it should not be considered a suitable final
calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.
Our Classic Fuel Injection Kits are custom built to order and to the
customer general specification and as such are exempt from automatic
return rights under Consumer Contract regulations.
By ordering this
conversion kit you understand that further ECU calibration work will be
required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.