Siemens Deka Style Fuel Injector - Reference Part number 110324, 835 cc/min  80LB
EV6 body style with EV1 Junior Timer connector.

These injectors are based on the 110324 but have been professionally modified by a Siemens injector expert to give the revised flow of 835cc

When used with our systems these injections are good for around 150 BHP per injector

So this gives the following options
1 injector for engines upto around 150 BHP
2 injector for engines upto around 300 BHP

The price shown is per injector - adjust your basket quantities to suit your application

- 835 cc/min @ 3bar (43.5psi)
- 12 ohms resistance (HIGH impedance)
- EV6 Long body style
- Standard 2 pin Junior timer connector ( often called EV1 connector )

Siemens Deka Style Fuel Injector - Reference 110324 - 835 cc/min

  • £45.00

  • Ex Tax: £45.00

Tags: Siemens Deka 110324 835cc


The vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.

This initial start file is simply provided as an aid for engine starting, it should not be considered a suitable final calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.

Our Classic Fuel Injection Kits are custom built to order and to the customer general specification and as such are exempt from automatic return rights under Consumer Contract regulations.
By ordering this conversion kit you understand that further ECU calibration work will be required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.