• Lucas 23D4 Distributor - modifed for Classic Fuel Injection

Lucas 23D4 Ignition distributor - Modifed
(these are reproduction / clone parts made to the same pattern as the Lucas genuine )

Can be used inconjunction with our classic Fuel Injections kits on vehicles fitted with

Lucas 23D4 - 43D4 - 25D4 - 45D4 distributors

Can also be used with some Bosch units - please research and check dimensions first, but customers report it seems to fit several variations commonly used

Ready modifed for use with Classic Fuel Injection system with hall effect sensor
( welded advance weights, fitment of hall sensor etc )

In this modifed condition the distributor can only be used in conjunction with our Classic Fuel Injection kits.
( you cannot use this modifed part on a standard engine without the Classic Fuel Injection system )

We can also supply in a standard unmodified condition - if you wish for one of these please advise in comments section of checkout page

( the 23D4 does not have vacuum advance - so consider this if ordering a standard unmodified part )

Lucas 23D4 Distributor - modifed for Classic Fuel Injection

  • Brand: Powerspark
  • Product Code: lucas23d4-modified
  • Availability: 96
  • £90.00

  • Ex Tax: £90.00

Tags: Lucas 23D4 Distributor, Hall Effect


The vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.

This initial start file is simply provided as an aid for engine starting, it should not be considered a suitable final calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.

Our Classic Fuel Injection Kits are custom built to order and to the customer general specification and as such are exempt from automatic return rights under Consumer Contract regulations.
By ordering this conversion kit you understand that further ECU calibration work will be required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.