.

MaxxECU Engine Management System - MINI ECU with ECU connector and flying lead harness approx 2.5m long

Price shown includes VAT at 20% ( £564 = £470 + vat )

We are authorised dealers of the MaxxECU Engine management ECU's


Summary of Features
MaxxECU MINI
  • Advanced entry-level engine control system for up to 4 sequential cylinders. Up to 8 in wasted spark.
  • Faster and easier tuning with the built-in MAP-sensor up to 3 bar / 43.5 psi of boost.
  • Get started faster with the easy-to-use MTune PC-software
  • Waterproofed aluminium case
  • Boost control (triple stage)
  • Traction control
  • Internal loggings
  • Shift-cut and launch
  • Advanced warning system
  • Launch control
  • Built-in MAP-sensor
  • 4 injector outputs (high impedance)
  • 4 ignition outputs
  • 4 extra outputs (GPO)
  • 2 extra analog inputs (0-5V)
  • 2 extra digital inputs (HALL)
  • CAN bus


  • Target engines for MaxxECU MINI
  • All 1-4, 6 and 8 cylinder engines
  • Can be triggered from the existing distributor meaning no timing wheel required
  • If you add a timing wheel then you can run -
  • Up to 4 cylinders fully sequentially (using a digital input as HOME)
  • Up to 8 cylinders in wasted spark mode


  • MaxxECU MINI inputs
  • Intake air temperature sensor (IAT)
  • Coolant temperature sensor (CLT)
  • Throttle position sensor (TPS)
  • 1 trigger input (VR/HALL). Automatic trigger level detection
  • 2 digital inputs used for example for speed sensors (Hall) or switches
  • 2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
  • Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost


  • MaxxECU MINI outputs
  • 4 injectors outputs. High impedance only
  • 4 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
  • 4 outputs for extra features.
    Can be used to control virtually anything.
    Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc.
    GPO 1-3 (2A), GPO 8 (2A)


  • MaxxECU MINI technical
  • CAN bus for expansion modules, OEM vehicle CAN, ODBII
  • USB communication for tuning with MTune
  • 8MB memory for internal logging, up to 1000Hz
  • Supply voltage 8-22V
  • ARM Cortex-M3 120MHz main processor
  • Resolution on ignition: 0.1 degrees
  • Resolution on injectors: 0.001 ms
  • Updates the fuel and ignition calculations 2000 times per second
  • The fastest PC communication on the market
  • 85x120x43mm excluding protruding connectors
  • Weight: 245g (ECU only)
  • Waterproofed aluminium case
  • MaxxECU Engine Management System - 1. MINI ECU - With Harness

    • Brand: MaxxECU
    • Product Code: maxxecuministandard
    • Availability: 100
    • £470.00


    Tags: