.

MaxxECU Engine Management System - STREET ECU with ECU connector and flying lead harness approx 2.5m long

Price shown includes VAT at 20% ( £780 = £650 + vat )

We are authorised dealers of the MaxxECU Engine management ECU's

These units are supplied special order with delivery around 5 to 7 days from your order
Summary of Features
MaxxECU STREET

Advanced entry-level engine control system for up to 6 sequential cylinders. Up to 12 in wasted spark
  • Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost.
  • Get started faster with the easy-to-use MTune PC-software


  • Selected features
  • Aluminium casing
  • Boost control
  • Shift-cut
  • Internal loggings
  • Flex fuel
  • Advanced warning system
  • Built-in wideband lambda
  • Launch control
  • Anti-lag
  • 6 injector outputs (high impedance)
  • 6 ignition outputs
  • 4 extra outputs (GPO)
  • 4 extra analog inputs
  • 2 extra digital inputs
  • CAN bus (additional wires required)


  • Target engines for MaxxECU STREET
  • All 1-12 cylinder engines (4-stroke)
  • Up to 6 cylinders fully sequentially
  • Up to 12 cylinders in wasted spark
  • Can be triggered from the existing distributor meaning no timing wheel required
  • If you add a timing wheel then you can run -
  • Up to 6 cylinders fully sequentially (using a digital input as HOME)
  • Up to 12 cylinders in wasted spark mode


  • MaxxECU STREET inputs
  • Intake air temperature sensor (IAT)
  • Coolant temperature sensor (CLT)
  • Throttle position sensor (TPS)
  • Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2, 4.9
  • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
  • 2 extra temperature sensors. Can be used as switches or to control additional functions
  • 2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
  • 2 digital inputs used for example for speed sensors (Hall) or switches
  • Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost


  • MaxxECU STREET outputs
  • 6 injectors outputs. High impedance only
  • 6 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
  • 4 outputs for extra features. Can be used to control virtually anything.
    Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc.
    GPO 1-3 (2A), GPO 8 (5A)


  • MaxxECU STREET technical
  • CAN bus (additional wires required)
  • USB communication for tuning with MTune
  • 8MB memory for internal logging, up to 1000Hz
  • Supply voltage 8-22V
  • ARM Cortex-M3 120MHz main processor
  • Resolution on ignition: 0.1 degrees
  • Resolution on injectors: 0.001 ms
  • Updates the fuel and ignition calculations 2000 times per second
  • The fastest PC communication on the market
  • Weight: 520g
  • 140x134x42mm (including mounting points, excluding connector)
  • Aluminium casing
  • MaxxECU Engine Management System - 2. - STREET ECU - With Harness

    • Brand: MaxxECU
    • Product Code: maxxecustreetstandard
    • Availability: 100
    • £650.00


    Tags: