Studebaker Daytona Classic Car Fuel Injection Conversion
Will suit either the 259 cu in or 289 cu in engines
Based on our Premium Vehicle Kit for vehicles fitted with American V8 engines.
This kit will suit many of the US V8 engines as fitted to Chevolet, GM, Ford and Chrysler vehicles
currently fitted with a 4 BBL carburettor.
Complete with an included adaptor this should fit any vehicle with the standard "Square Bore " or " Spread Bore " inlet manifolds.
This kit will support many " Small Block " engines from around 4.0L upto around 5.7L and around 250 BHP.
For larger engines with more power and " Big Block " vehicles it is recommended to use our Big Block kit.
You can also use this kit as a base for other V8 engines such as the Rover V8 but you may need to make changes to the adaptor and / or manifold
Save around £200 when buying as complete kit
(compared to individual component prices)
This kit contains all the parts needed for our Classic Fuel Injection system
(you do not need to order anything else from our range )
This Premium kit will suit most small block engines fitted with a 4 barrel carburettors.
This kit has a refurbished and rebuilt GM TBI throttle body that replaces the existing carburettor and is a direct bolt on replacement using the adaptor and also looks visually similar to the original carburettor.
We have assembled this kit for easy ordering but if you prefer you can still order some or all of the parts using our individual listings
Ordering our kits will also save you money, our kits are typically 10 to 15% cheaper than ordering individual parts
This kit contains
Engine ECU - Most of our systems are now based on the MaxxECU MINI ECU
ECU to Laptop communication lead
Engine Sensor Kit Comprising -
Throttle Position Sensor - inbuilt into the TBI adaptor
Coolant Temperature Sensor
Manifold Absolute Pressure Sensor
Idle Control Valve - inbuilt into the TBI adaptor
Idle Control Valve Housing - inbuilt into the TBI adaptor
Wide Band Oxygen Sensor Amplifier
Wide Band Bosch Oxygen Sensor
Weld On Oxygen Sensor Boss
Fuel System Kit Comprising -
High Pressure Fuel Pump
Fuel Pump Brackets
Inline Fuel Filter
Fuel Filter Bracket
Fuel Pressure Regulator - inbuilt into the TBI adaptor
10m of High Pressure Fuel Hose
Fuel Hose Clamps
Fuel Injectors - inbuilt into the TBI adaptor
2 x Delphi TBI Injectors for total engine power upto around 250 BHP
Universal V8 wiring loom ready to install
Please note this kit does not contain nuts, bolts and other fixings or adapters as they will be specific to your application but will easily be sourced from your normal suppliers or your existing workshop stock of parts.
Classic Fuel Injection Conversion, Studebaker Daytona, Premium Kit
- Ex Tax: £1,500.00
Classic Fuel Injection Conversion,
IMPORTANT INFORMATION RELATING TO THE RETURN OF COMPLETE FUEL INJECTION VEHICLE KITS
The vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.
This initial start file is simply provided as an aid for
engine starting, it should not be considered a suitable final
calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.
Our Classic Fuel Injection Kits are custom built to order and to the
customer general specification and as such are exempt from automatic
return rights under Consumer Contract regulations.
By ordering this
conversion kit you understand that further ECU calibration work will be
required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.