Error Code Cleaner / Eraser for DAF Euro 6 Trucks from 2017 upto 2022

Error Code Cleaner is standalone device. Using it is very easy and fast, just:

1. Turn ignition ON 
2. Connect Device to diagnostic connector of the vehicle.
3. Working/Done lamp starts blinking, wait until lights up permanently green. 
4. Switch ignition OFF and disconnect eraser, that's all!

All " Inactive " errors from supported systems are cleared!
It will not clear " Active " errors ( error codes where the fault cause is still present )

DAF Euro 6 Eraser 2017 to 2022 supported systems:

• PCI – Enige
• EAS4 – Exhaust Aftertreatment system
• VIC3 – Vehicle ECU
• VECU – Master Vehicle ECU
• EBS3 – Brakes System
• Traxon – Automatic Transmision
• AEBS – Emergency brake system
• CCC – Air conditioning control
• CDS-4 – Central lock
• DIP5 – Instruments
• CMF – Front frame module
• CMR – Rear frame module
• CSM – Cabin module
• DTCO – Tachograph
• ECAS 5 – Pneumatic suspension
• EST54 – Retarder
• LDWS-3 – System Laneguard
• PCC – Tempomat
• SAC – Air production management
• SWS – Sterring wheel buttons

Supported Models:

• XF 106 2017 to 2022
  
• CF Euro 6 2017 to 2022
  

 This Device supports disabling Torque reduction / Speed reduction after Exhaust Aftertreatment System Failure !

The Error Code Cleaner checks connection with the vehicle. If there is no connection with vehicle it display the "Error" indicator. Thanks to this you can be sure that unwanted errors have been removed!

Error Code Cleaner is equipped with three indication modes:

1. Power - Light On when Cleaner has Power supply from diagnostic connector
2. Working/Done - this LED blinks when eraser is working and is permanently on when eraser finishes with success
3. Error - is permanently ON if there is no connection with vehicle or blinks when device is connected to unsupported vehicle